BGMQB - ABLETHERM 12-1 (ADHESIVE - UNCURED)
- MSDS: BGMQB
- Manufacturer: ABLESTIK LABORATORIES DIV NATIONAL STARCH AND CHEM
- Product Name: ABLETHERM 12-1 (ADHESIVE - UNCURED)
- National Stock Number: 8040-01-119-6104
Product Identification
Product ID:ABLETHERM 12-1 (ADHESIVE - UNCURED)
MSDS Date:07/29/1986
FSC:8040
NIIN:01-119-6104
MSDS Number: BGMQB
Responsible Party
GARDENA, CA 90248-3409
Emergency Phone: 213-532-9341
Info Phone: 213-532-9341
Cage: 9V874
Contractor
Telephone: 310-764-4600
Cage: 21109
Ingredients
NON-HAZARDOUS INGREDIENTS.
Hazards
Effects of Overexposure:EYES/SKIN: MAY IRRITATE SENSITIVE PERSONNEL.
INHAL: NOT KNOWN. INGEST: NOT KNOWN.
First Aid
First Aid:EYES:FLUSH W/WATER FOR @ LEAST 15MIN.-GET MED.ATTN; SKIN:
WASH IMMED. W/SOAP & WATER. IF IRRITATION PERSISTS, SEEK MED. ATTN.
IMMED.; INHAL: REMOVE TO FRESH AIR;IMMEDIATELY. INGEST: SEEK MED.
ATTN. IMMEDIATELY.
Fire Fighting
Flash Point:>250F>121C PMCC
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL & FOAM
Fire Fighting Procedures:WEAR SCBA' WHEN FIGHTING FIRES INVOLVING
CHEMICALS.
Unusual Fire/Explosion Hazard:NONE KNOWN TO MFR
Accidental Release
Spill Release Procedures:WIPE UP WITH SOLVENT SATURATED TOWELING &
COLLECT IN AN APPROPRIATE CONTAINER FOR DISPOSAL.
Handling
Handling and Storage Precautions:STORE FROZEN @ ALL TIMES. VENT CURING
OVEN TO OUTDOORS. AVOID CONTACT W/SKIN, EYES, & CLOTHING. AVOID
INHALING VAPORS. PRACTICE GOOD HOUSEKEEPING.
Exposure Controls
Respiratory Protection:NIOSH APPRVD. ORGANIC VAPOR RESPIRATOR IF
NEEDED.
Ventilation:MECHANICAL (GENERAL) ACCEPTABLE LOCAL EXHAUST IF NEEDED.
Protective Gloves:RUBBER
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:AS REQUIRED TO PREVENT PROLONGED CONTACT.
Supplemental Safety and Health
MSDS DATE:7/29/86
Chemical Properties
HCC:N1
Vapor Pres:LOW
Spec Gravity:2.3
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE PASTE
Percent Volatiles by Volume:<1.
Stability
Stability Indicator/Materials to Avoid:YES
ACIDIC, BASIC, OR OXIDIZING MATERIALS.
Stability Condition to Avoid:NONE KNOWN TO MFR.
Hazardous Decomposition Products:CARBON MONIXIDE, CARBON DIOXIDE, &
SILICON OXIDE
Conditions to Avoid Polymerization:WILL NOT POLYMERIZE
Disposal
Waste Disposal Methods:DISPOSE IN APPROVED CHEMICAL DISPOSAL AREA OR IN
A MANNER WHICH COMPLIES WITH ALL LOCAL, STATE, & FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.